hacked by syskc0

When it is time to replace your shower door sweep, don’t worry with frustrating and hard to follow instructions. If you will simply follow these simple steps, your shower door sweep will be replaced quickly and efficiently.

Tools that you will need:

Shower sweep

Caulking

Step 1: Open up the shower door and leave it open.

Step 2: Check to see if the door sweep needs to be unscrewed from the track. After it has been unscrewed, grab the edge of the door sweep, then pull it towards the outer side of the door, pulling the strip loose from the door.

Step 3: Go to your nearest hardware store with the old door sweep in tow to ensure you buy the correct size new door sweep.

Step 4: Cut the new door sweep by using the old one as a pattern, so that you will get the new one the exact same size.

Step 5: Replace the new door sweep in the same manner that you removed the old one.

Step 6: If you find water on the floor after taking a shower, use caulking around the shower door to prevent any further leaks.

This entry was posted on Tuesday, October 14th, 2008 at 9:43 pm and is filed under Bathroom Remodeling. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.